CLEVELAND
Industrial Instrumentation & Analyser Systems
  • Home
  • Brands
    • BTG Instruments
    • BTG Duroblade
    • Kytola Flowmeters
    • Hydramotion - Viscosity
    • LumaSense - INNOVA Gas Monitoring
    • Moore Industries - Instrumentation
    • XRF Scientific - Sample Prep
    • Chemplex - Sample Prep
    • Monitran - Vibration & Displacement
    • Memolub - Lube Systems
  • Products
    • Pulp & Paper Instrumentation
    • Creping & Coating Blades/Rods
    • Viscosity Measurement
    • Flowmeters
    • Gas Monitors
    • Signal Interface Instrumentation
    • XRF Sample Preparation Consumables
    • Accelerometers / LVDTs
    • Automatic Lubrication Systems
  • Contact Us

Memolub Automatic Lubrication Systems

Picture
The MEMOLUB HPS lubricator is an autonomous single/multi point electro-mechanical lubricator.  Its high lubricant ejection pressure of 25 bar opens a wide range of applications not possible with conventional systems.

Memolub HPS can be used remotely, up to 8 meters from the lubrication point.  Remote installation avoids dangerous or difficult access points allowing maintenance personnel to work in safety.  Machine stoppage for lubrication (impossible access, moving components, etc) can be avoided by installing Memolub HPS.

Memolub HPS can also be used as a small central lubrication system.   Combined with progressive distributor blocks, multipoint (up to 8 points) lubrication is a simple, economical way of reducing maintenance costs.

The MEMOLUB HPS lubricator is a state-of-the-art, low-cost alternative to manual lubrication of bearings, chains, open gears, roller rail systems, and sliding guide-ways in even the harshest of environments, including:

  • Quarries
  • Steel mills
  • Pulp and paper mills
  • Power plants
  • Automotive
  • Robotics
  • Food / Dairy

Memolub HPS replaceable cartridges are available in a wide range of grease and oil products and come in 3 sizes (120cc, 240cc and 480cc). 

MemoLub HPS

MEMOLUB® HPS is an autonomous refillable lubrication system for single or multiple point use.

With its 25 bar ejection pressure, it can be used with 2 to 8 outlets distribution blocks.

Its content of 120 cm3 – 240 cm3 or 480 cm3 and 5 daily output programs of 0.3 to 14.4cc make it the most versatile lubricator in our range.

Settings of 1 week to 24 months through MEMO rings (see technical data’s).  With its 25 Bar pressure, it can be installed remotely up to 10 meters from lube point or can be used up to 8 points with distributor blocks.  Certified ATEX-EX zone 22.


Memolub EPS

MEMOLUB® EPS is a single or multiple point refillable lubricator which can be installed remotely up to 10 meters.

External power source 24V.

Content of 120 cm3 – 240 cm3 or 480 cm3 and 5 daily output programs of 0.3 to 14.4 cm3.

Settings from 1 week to 24 months through the MEMO rings (see technical data’s table).

With its 25 Bar pressure, it can be installed remotely up to 10 meters from lube point or can be used up to 8 points with distributor blocks.

Memolub PLC

MEMOLUB® PLCD is a refillable single or multiple point lubricator which can be installed remotely.

Specific for OEM customers.

External power supply with programmable PLC.

With its 25 Bar pressure, it can be installed remotely up to 10 meters from lube point or can be used up to 8 points with distributor blocks.

Contact Cleveland
Cleveland Process Automation Limited
8/135 Cryers Road, East Tamaki, AUCKLAND, NEW ZEALAND
+64 9 272 3030
info@cleveland.co.nz