Advanced Energy - INNOVA Gas Monitors
For over 50 years, Advanced Energy has engineered the world’s most reliable sensor solutions. Learn the science behind light- based sensing technologies from the experts.
Advanced Energy’s temperature and gas sensing solutions are used in the most critical and complex environments imaginable. When experience matters, see how we solve some of the most challenging sensing applications. Our extensive line of robust temperature and gas sensing products provide unprecedented control over environments, safety, productivity and reliability. |
As the pioneer in trace and multi-gas analysis and monitoring solutions, Advanced Energy delivers a complete range of non dispersive infrared (NDIR) and Photoacoustic spectroscopy (PAS) gas concentration systems for all kinds of environments and applications.
Field Gas Monitor
Advanced Energy's INNOVA 1512 is based on the photoacoustic infrared spectroscopy and delivers superior sensitivity in a very compact form factor.
Extremely versatile by design, the 1512 is capable of measuring almost any gas that absorbs infrared light.
Gas selectivity is achieved through the use of optical filters. By installing up to five filters, the 1512 can measure the concentration of up to five component gases and water vapor in any air sample. The detection limit is gas-dependent, but is typically in the ppb region. Accuracy of these measurements is ensured by the 1512's ability to compensate for temperature and pressure fluctuations, water vapor interference, and interference from other gases known to be present.
Features
- Linear response over a wide dynamic range
- Remote control capability via TCP/IP network interface protocol
- Expandable up to 24 locations with INNOVA 1409 Multipoint Sampler; the gas monitor can operate as the system controller for full standalone operation
- Includes BZ7002 calibration software
- Includes BZ7003 offline software to set up the gas monitor without connecting it to a PC and to download data stored in the gas monitor's internal memories
- Available in single gas, dual gas, and 5 gas configuration
Benefits
- Selectively measure a wide range of gases / vapors
- Ensure a maximum of only two calibrations a year
- Operate immediately with virtually o warm-up time necessary
- Easily calibrate, configure, and view / analyse data via PC
- Accurately compensate for temperature and pressure fluctuations, water vapor interference, and interference from other known gases
Fixed Gas Monitor
Advanced Energy's INNOVA 1314i is a highly accurate, reliable, and stable quantitative gas monitor. Its measurement principle is based on the photoacoustic detection method. Extremely versatile by design, the 1314i can measure at trace levels almost any gas that absorbs infrared light.
Gas selectivity is achieved through the use of optical filters. By installing up to five filters, the 1314i can measure the concentration of up to five component gases and water vapor in any air sample. The detection limit is gas-dependent, but is typically in the ppb region.
Features
- Linear response
- User-friendly, stable, reliable, and highly accurate
- Extremely low-volume flushing possible
- Remote control capability via TCP/IP network interface protocol
- Expandable up to 24 locations with INNOVA 1409 Multipoint Sampler; the gas monitor can operate as the system controller for full standalone operation
Benefits
- Selectively measure a wide range of gases / vapors
- Ensure a maximum of only two calibrations a year
- Operate immediately with virtually no warm-up time necessary
- Easily calibrate, configure and view / analyse data via PC
- Accurately compensate for temperature and pressure fluctuations, water vapor interference, and interference from other known gases
SF6 Leak Detector
Advanced Energy’s Innova® 3731 SF6 system utilizes the ultra-sensitive photoacoustic sensing technique to provide a leak detection solution that monitors large switchgear rooms. The system verifies that GIS equipment operates below the 0.5% yearly leakage rate, which is the industrial target. And the 3731 system quickly detects any excessive increase in the leak rate.
Analog output is available for detection trending over time. Measurements are also stored in the internal memory. They can be exported to a remote LAN computer via the user-friendly software interface.
Features
- Standalone Multipoint SF6 leak monitor with superior photoacoustic detection (detection limit = 6ppb)
- Independent from pressure or density readings
- Highly reliable and stable
- Entensive sampling-point distribution over the whole enclosed substation
- Monitor and sampler units are rack-mountable on a standard 19" chassis
Benefits
- Calibrate the monitor once a year (no equipment outage needed)
- Lower costs
- Set up tasks using either the remote/offline software or the front panel push-keys
- Enable a direct and integral leak detection solution that can monitor large switchgear rooms
- Achieve exceptional accuracy
Multi-point Gas Sampler
The Advanced Energy Innova 1409 is a reliable, easy-to-use multipoint sampler for gas sampling of up to 24 different locations. The Innova 1409 is designed to be remotely controlled from a PC using a USB interface in conjunction with an Innova Photoacoustic Gas Monitor to provide a flexible, sensitive, and accurate monitoring system.
- In conjunction with an Innova gas monitor, measure concentrations of up to five gases, water vapor, and air pressure in each sample
- Full remote control from a PC with Innova ventilation software
- Remotely control the instrument by using an Innova photoacoustic gas monitor or a PC
Features
- Pneumatic system constructed of AISI 316 Stainless Steel and PTFE tubing to minimise gas adsorption
- Six to 24 inlet channels, depending on the configuration
- Transports gas samples from the sampling point at ~4 metres per second
- Each sampling tube includes an air filter to keep the INNOVA 1409 free of particles
Benefits
- Collect air samples from up to 24 locations
- Use as a standalone multipoint monitoring system or use online for on-screen measurement data results
- Remotely control using the gas monitor or a PC
- Combine with a gas monitor for versatile monitoring without changing system components
The Advanced Energy Innova 1403 is a reliable, easy-to-use multipoint sampler and doser. It combines with the Innova 1512 photoacoustic gas monitor and a controlling computer featuring the Innova 7650 basic ventilation software to offer numerous monitoring capabilities.
- Increase area monitoring capabilities of the gas monitor by collecting air samples through tubing from up to six sampling points
- Full remote control from a PC with Innova ventilation software
- Factory calibrated dosing system includes automatic calculation of tracer-gas delivered to the dosing location
- Self-test function for verification of the unit's operation
Features
- Pneumatic system constructed of AISI 316 Stainless Steel and PTFE tubing to minimise gas adsorption
- A pressure transducer checks the efficiency of the sampling pump
- Two dosing types available pulsed injection for decay measurements or constant dose for flow measurements
- Measurement results available in numerical and graphical curve views
Benefits
- Collect air samples from six locations
- Deliver tracer gas to up to three areas
- Reduce wait time with sample collection during prior sample analysis
- Receive errors and warnings on operating status directly in the software
- Ensure accurate results with factory calibration for SF6 and Freon134a
Tracer Gas System
The Advanced Energy Innova 3751-2 basic ventilation system (dual gas) and Innova 3751-5 basic ventilation system (multi-gas) offer fully integrated gas monitoring solutions. They enable accurate tracer gas methods and are ideal for ventilation performance studies or testing.
Tracer gas methods enabled:
- Concentration decay
- Constant injection
- Constant concentration
Advanced Energy’s tracer gas systems include the field-proven and accurate Innova® 1512 photoacoustic gas monitor, the Innova 1403 multipoint sampler and doser unit, and the Innova 7651 advanced ventilation software. The Innova 1512 photoacoustic gas monitor can be calibrated for SF6, R134a, and CO2. It detects within the ppb range for most compounds used as tracer gases. Connectivity accessories are supplied.
Innova 3751-2 Components:
- Innova 1512 photoacoustic gas monitor for dual monitoring
- Innova 1403 sampler/doser with six sampling ports
- Innova 7651 advanced ventilation software
Innova 3751-5:
- Innova 1512-5 photoacoustic gas monitor for multi-gas monitoring
- Innova 1403 sampler/doser with six sampling ports
- Innova 7651 advanced ventilation software
Features
- Multi Gas Monitoring (e.g. SF6 as tracer and CO2 as complementary marker in indoor air quality applications)
- Tracer gas flexibility (SF6 or R134a)
- Enabling all tracer gas methods: concentration decay, constant injection (or tracer gas dilution)
- Low detection limit and advanced dosing control
Benefits
- Ease of use (gas instrumentation expertise not needed)
- Enable accurate tracer gas methods
- Minimise expensive tracer gas consumption
- Reduce/eliminate calibration requirements
- Promptly operate (rapid warm-up time)
Automotive Emissions Monitor
The Automotive Emissions Monitor - 3433i is a highly accurate and reliable Multi Gas Monitor based on the INNOVA 1314i platform with special configuration for Exhaust Gas or SHED Evaporative Emissions Testing.
Its measurement principle is based on the photoacoustic detection method, is capable of measuring almost any gas that absorbs infrared light.
Features
- Equipped with standard interfaces: USB, Ethernet, and RS232
- Housed in a rugged box that fits a standard 19" rack
- Typical gas detection limits within the ppb region
- Calibrate through easy-to-use menu driven instructions
- Typical applications include automotive monitoring of vehicle exhausts and SHED evaporative emission testing
Benefits
- Monitor up to five components gases and water with five optical filter installations
- Collect samples from up to 50m away with the built-in pump system
- Remotely control via TCP/IP network interface protocol
- Easily calibrate, configure, and view data via a PC
- Operate using either the front panel with push buttons and display or PC using Innova software
Typical Applications
- Automotive monitoring - of alcohol content in vehicle exhausts and production of NH3 and N2O in diesel exhausts
- Automotive SHED evaporative emission testing